|
Post by ARCHRIVAL on Dec 4, 2010 23:48:26 GMT -5
My d-boys m4 is actiing up bro. Tino used it in the last game saturday and had a jamming issue. Could you take a look at it before Jumpout Boys for me? Pm me back.
|
|
|
Post by Maverick on Dec 5, 2010 10:25:27 GMT -5
Yea I can take a look at it. What kind of jamming issue? Was it a mechanical jam as in the gun wouldnt cycle, or as in the bbs were jamming up and not firing?
|
|
|
Post by ARCHRIVAL on Dec 5, 2010 10:44:10 GMT -5
Both...when the bbs were removed the gear box was moving eraticly when fired.
|
|
|
Post by overkill on Dec 5, 2010 13:01:14 GMT -5
Check the bushings, dboys uses a very low quality ball bearing bushing. (I just had the same problem with my dboys pdw) Be aware if you need new that they are most likely 7mm if it's a dboys gear box, and nobody locally stocks them (just 6mm) Don't be surprised if you can't find a website that carries 7mm Systema bushings (the only way to get 7mm from Systema is with their gearbox) I got temporarily lucky, because maverick had some spare plastic ones, your welcome to use them once mine come in next week.
|
|
|
Post by ARCHRIVAL on Dec 5, 2010 20:11:30 GMT -5
Overkill: Thanks bro, Maverick did a shim job on it last time he had it. I'll have him take care if that problem when he gets it.
Maverick: Get a hold of me when you want me to drop it off to you.
|
|
|
Post by Maverick on Dec 5, 2010 20:39:22 GMT -5
Yea, I shimmed the rifle, and I think I also put in metal bushings, but I cant remember off the top of my head.
If you wanna swing by after 1 tomorrow, between 1-330 on Tues, or after 2 on Wed, I will be here.
|
|
|
Post by Tino on Dec 5, 2010 22:06:10 GMT -5
I ahve to take him ot the Schoolcraft warehouse and drop off my M4 so we can just do it then.
|
|
|
Post by overkill on Dec 6, 2010 8:51:30 GMT -5
Sooner or later, I'll learn to keep my mouth shut. LOL
|
|
|
Post by Maverick on Dec 6, 2010 10:32:58 GMT -5
Lol, there is no reason to keep your mouth shut. And see you on Wed. then Tino.
|
|
|
Post by Doc on Dec 7, 2010 9:14:24 GMT -5
If need be I have some 7mm bushings let me know. I can get them out to you if you need them.
|
|